Free shipping, no minimum · 30-day guarantee · Made in Orange, California
The Energy Drink Cup Holder.com ← back to the energy drink page

Details

Every question, answered.

All 17 of them — the practical, the skeptical, and the honest limits. Missing yours? hello@steadilabs.com reads everything.

Will it actually save my keyboard?

That's the scenario it's built around. A can on a bare desk has nothing to lean on if a mouse sweep or a controller reach clips it; this holds the can's bottom inch and resists tipping, so an ordinary bump is far less likely to end with a spill running under the keys.

My factory cupholder is too shallow for a tallboy — does this help in the car?

Yes. It works at least as well on a hard, flat console or seat as anywhere else — set it beside the factory holder instead of in it, and the wide base and the fins do what the shallow holder can't: keep a tall can from rattling loose on the highway.

Does it work at the gym?

Yes — set it on the floor next to the bench or on any flat spot near the equipment. The wide base grips the gym's uneven, shared floor better than a can balancing on its own narrow bottom, and it settles back if it gets bumped between sets.

Will my can fit — tallboy or slim can?

Both. A base of 2 to 3 inches across settles in, and that covers the wide tallboy cans (Monster, Rockstar, Bang, Reign, C4, Ghost) and the narrower slim cans (Red Bull, Celsius, Alani Nu) alike. The 40 oz Stanley fits too.

Does a mug work if it has a handle?

Not quite — the handle sits right where a fin needs to close, so handled mugs don't fit. Anything handle-less within that 2 to 3 inch base range is fine.

Does it clamp to my desk or my car's console?

No. Nothing clamps, clips, or mounts to anything. It's one piece that sits on top of whatever surface you set it on — desk, console, gym floor — and moves with you when you're done.

I work nights — warehouse, hospital, trucking. Does it hold up to that kind of use?

That's exactly the use case. It's built to sit on whatever surface a shift actually gives you, not a dedicated desk, and it settles back when the surface underneath it moves — a moving vehicle, a shared floor, a cart.

How do I clean it?

The sticky, sugary residue that makes an energy-drink spill worse than water comes off the same way water would — under the tap or through a dishwasher cycle. One piece of flexible material, nothing to take apart.

Who makes it, and where do I buy one?

It's called the Steadi, molded in small runs in Orange, California by Steadi Labs. Every order ships free from steadilabs.com, with 30 days to change your mind.

What's the actual size difference between a "slim can" and a tallboy?

More than the marketing suggests, but they land in the same fit window either way. Celsius and Alani Nu both use the industry "sleek" can body, about 2.25 inches across; Monster, Rockstar, Bang, Reign, C4, and Ghost share the wider 2.60-inch standard tallboy body. Red Bull is the outlier worth knowing: only its short 8.4 oz can is genuinely narrow, at about 2.08 inches — its 12 oz and 16 oz cans actually use the same 2.60-inch body as a tallboy. Everything on that list settles inside the 2 to 3-inch fit range, which is exactly why the fins flex instead of gripping one fixed size.

Does it fit a G Fuel or Gamer Supps shaker cup, not just a can?

Yes. A shaker cup in the 16 to 24 oz range has a round base that falls inside the same fit window as a can, so it settles in the same way. The flip-top lid limits how much comes out if it does get knocked, but it doesn't change the base — a full shaker is just as top-heavy as an open can, which is the part this actually addresses.

Will a 5-hour Energy shot bottle fit?

No — its small bottle sits well under the 2-inch floor, so there's nothing for the fins to close around. That's the honest floor as well as the ceiling: a base has to be at least 2 inches across before this can do anything for it.

Can I keep one at my desk and another in the car, or do I need a different one for each spot?

Either works. Nothing clamps or mounts to anything, so it's just as easy to keep one on the desk and set another beside the car's factory cupholder, or move a single one between the gym bag and the console. It's one piece of flexible material, not a fixed installation, so there's no reason it has to stay put in one spot.

Does condensation from a cold can cause any problems, or is that just something to wipe up?

Just wipe-up. Condensation is plain water — it doesn't damage the base, and cleanup is the same as any other spill: rinse it under the tap or run it through a dishwasher cycle. It's one piece of flexible material with nothing to take apart or trap moisture inside.

Do the flexible fins wear out or lose their grip after a lot of use?

There's no published cycle count on it, so this won't invent one. What's true is that it's a single molded piece of flexible material, not a spring clamp with parts that can snap or a hinge that can work loose. If a specific one doesn't hold up in your actual routine, the 30-day window covers it.

Is this a good gift for a gamer, a night-shift worker, or someone cramming for finals?

Good instincts — gaming desks, night-shift work, and finals-week studying are three of the exact settings this door is built around. It comes in a handful of colors and needs no setup or mounting, so it works as a straightforward gift without much guesswork about what the person actually needs.

I already have a clamp-on desk cup holder — what does this do differently?

A clamp has to be sized to one fixed diameter, but this category spans more than half an inch between the narrowest slim can and the widest tallboy — size it for one and the other either rattles loose or won't seat. Clamps also mount to the desk edge, which buying guides note is often out of easy reach, and a fixed ring doesn't travel to the car or the gym floor with you. This is one loose piece that goes wherever the can does, with fins that flex across that same spread instead of committing to a single size.

Choose your colors — free shipping

You'll finish at steadilabs.com — Steadi Labs is the manufacturer.